In rainwater irrigation method, irrigation water is carried to rainwater nozzles under pressure and inside closed pipes and natural rain-like irrigation is applied on the soil. This method can be applied on the slightly inclined, uneven field with less depth without water loss and causing erosion and it can be also efficiently applied to soils with high permeability or low water holding capacity.
The rainwater irrigation pipes are manufactured under TS 418-2 PR EN 12201-2 ve TS 418-2 EN 12201-2 standards and ISO EN 3007 quality management system with high-density polyethylene (HDPE), in 50 – 63 – 75 – 90 – 110 – 125 – 140 – 160 – 180 – 200 – 225 – 250 mm diameter and 5 and 6 metres length.
Rainwater irrigation pipes and inserts have latched and clamped form and these are durable against sunrays, cracks and fractures. Additionally, Abot, cross and T nozzle pipes are manufactured.
Ratchet
Clamped
Sprinkler
Ratchet Inserts
Cross
TE
Elbow
Reduction
Reverse Reduction
Abot
Abot (Old model)
Male Cap
Female Cap
Butterfly Line Valve
Universal Line Valve
Motor Pump Nozzle Line Valve
Gasket
Adapter Transition Piece (Male – Male)
Adapter Transition Piece (Female – Female)
Adapter Transition Piece (Clamped – Female)
Male Motor Pump
Female Motor Pump
Extension Pipe
Latch Set
Clamped Inserts
Cross
TE
Elbow
Reduction
Reverse Reduction
Abot
Male Cap
Female Cap
Male Motor Pump
Female Motor Pump
Blind Plug
Clamp
Clamp Line Valve
Universal Line Valve
Adapter Transition Piece (Male – Male)
Adapter Transition Piece (Female – Female)
Adapter Transition Piece (Clamped – Female)
Gasket
Extension Pipe
Latch Set